SmithCo’s Construction Pup is designed for both off-road construction and agriculture; it can be pulled with off-road construction power units or tractors.
The configuration flexibility offered by the CP30 trailer allows you to run a single 30-ton unit in tight conditions or hook them in tandem or triple combinations to move large amounts of materials.
These trailers are available in 30 ton capacity with a variety of construction grade or flotation type tires. A 2″ drawbar pin type hitch is standard but scraper type adapters are also available.
Whether you want to top load materials your scraper can’t handle or you want to haul ag products to the field, the CP Series is the perfect choice.
Read how to haul more and haul better with a CP30.
- 30 ton capacity
- Dumps toward either side
- Stockpile or windrow
- Watertight; no leaks
- Low load height
- Steel Tubs AR450
- 80/100 KSI Steel Frames
- 30 K Axles
- 90k walking beam
- Flotation Tires
CP30 Tub Capacities
15 cu yd
22 cu yd (Bolt On Extensions to 49 cu yd available)
CP30 SmithCo Side Dump Trailer
20-ton model also available.
Side Oscillating, 2" Drawbar Pin, 360 degree rotation
1/2" Safety Chains w/ Safety Hooks
1/4" Thick, Steel (or equivalent)
AR450 Round Floor Style Tub
80/100 KSI, Fabricated Steel I-Beam
|Cylinders||3500 PSI, 5" bore|
|Hinges||Self-Aligning, Spherical Bearing Type (greaseable)|
90K Single Point Walking Beam
|Hubs||10 Hole, Hub Piloted|
|Drums||Outboard Mount, Cast Steel|
Hydraulic and Air Available
Tubeless, Steel Disc
750/45 R 22.5 LGP (std)
|Lights||12 Volt ICC w/ Sealed Harness|
Polyurethane, any combination of gray, white or black
Special colors available upon request
|Min. Tractor Hydraulic Reqs.||
10 Gallon Reservoir
|Net Payload Rating||30 tons|